Polyurethane parquet varnish ultra-resistant Joncryl
Water-based polyurethane parquet varnish | ДСТУ Б В.2.7--233:2010 |
---|---|
Surface preparation: |
Clean the surface from dirt and dust, dry the moisture. During operation, avoid direct exposure to sunlight and drafts. Work should be carried out at temperatures from 15°C to + 25°C and relative humidity 50-70%. |
Application: |
Lacquer in 2-3 layers with intermediate sanding after 2-4 hours. Without sanding, the varnish can be reapplied after 1-2 hours. To obtain a high-quality smooth surface, sand after applying each layer. Apply varnish with a brush or spray. |
The addition of pigments provides the desired decorative effect and UV protection. Surfaces exposed to the sun are recommended to be tinted. |
|
Drying time: |
Up to 2-3 hours at +20ºС/65% relative air humidity. Low temperatures and high air humidity prolong the drying time. |
Consumption: |
Consumption is about 1l / 8-12 m2. |
Retail trade capacity: 10L, 2.5L, 0.8L. |
|
Shelf life: |
Store at a temperature not lower than 5°C, avoid direct sunlight. Shelf life 12 months in original packaging. |
Cleaning of working tools: |
Rinse tools with water immediately after completion of work.. |
Composition: |
Water-soluble composition based on aliphatic polyurethane dispersion with stabilizing additives. the appearance of the protective film is transparent without inclusions. |
Safety requirements: |
Do not use empty food storage containers. Store and transport in hermetically sealed containers. at temperatures from plus 5°С to plus 30°С in a dry, well-ventilated area, away from heat sources. Protect from direct sunlight and freezing. |
Made in Ukraine: |
Manufacturer: LLC "Scientific and Production Enterprise "Bionic House", |