«WOOD WAX PRO» Professional wood wax paint
"Wood Wax Pro" Wood Wax lasure For interior and exterior use | ТУ У 20.5-39517487-001: 2015 |
---|---|
Surface preparation: |
The moisture content of the wood must not exceed 15%. clean wood from bark, dust, dirt, peeling old coatings and other contaminants. Sand and clean the dry surface. Remove waxes, resins and oils with nitro solvent (ethyl acetate, 646 solvent). |
You can use as a primer "Antiseptik Base impregnate" and "Antiseptik Organic protect" ТМ Bionic-House. |
|
Staining: |
Apply Wood Wax PRO lasure paint with a brush in 1-2 layers, spray or roller in 2-3 steps with an interval for drying for about 2 hours at a temperature not lower than +8°C(!). Attention! Do not mix with other formulations. During storage of the material, delamination is possible, which does not impair its quality. Before use, the material must be thoroughly mixed for 5 minutes. If necessary, it is possible to dilute with water (up to 10% of the total volume). At the same time, the product does not lose its properties and color. |
Drying time: |
no more than 1 hour at a temperature of 18-22°C. |
Consumption: |
1l/8-12 m2 when applied in one layer. The exact consumption is established by a trial application on site. |
Retail commodity capacity: 10l, 2,5l, 0,8l. |
|
Storage conditions: |
store at temperatures from +5°C to +30°C in a dry, well-ventilated room, away from heat sources; keep away from direct sunlight, freezing. |
Storage period: |
2 years in a hermetically sealed container. For questions about actions at the end of the shelf life of products, contact the manufacturer. |
Composition: |
a composition of water-based alkyd-acrylic polymers, a mixture of active target antiseptics, pigments, wax and other additives. Safety measures: when applying an antiseptic, exclude contact with open parts of the body, ingestion. In case of contact with eyes and mouth, rinse thoroughly with water. Store and transport in a tightly closed container. After using the product for its intended purpose, close the container tightly and send it to a household landfill. |
Made in Ukraine: |
Manufacturer: LLC "Scientific and Production Enterprise "Bionic House" |