Quartz-primer adhesive
| Quartz-primer adhesive For indoor and outdoor use | |
|---|---|
Conclusion of the sanitary and epidemiological examination |
 
|
Surface preparation: |
The surface must be clean, dry, sound and free of grease. Surfaces previously coated with chalk, adhesive, lime or silicone paints should be cleaned until the old coating is completely removed. If there is mold or fungus on the surface, remove them mechanically and treat with Bionics House bioprotection. |
Getting Started: |
Mix thoroughly, apply in 1-3 layers. The second layer is applied after the first one has dried at a surface temperature of at least +10°C. |
Dry time: |
Drying time at +20ºС and relative humidity 50%-60% - 2 hours to touch. 4-6 hours interlayer, 24 hours full |
Expense: |
Approximately 2-4 m²/l. |
Retail sales capacity: 10L |
|
Storage conditions: |
At temperatures from plus 5ºС to plus 30ºС in a dry, well-ventilated area, away from heat sources. Protect from direct sunlight and freezing. |
Shelf life: |
18 months of the year in a hermetically sealed container. For questions about the actions to be taken at the end of the shelf life of products, contact the manufacturer. |
Composition: |
Polymer-based binder, quartz filler, functional additives |
Precautions: |
Keep away from children! In case of contact with eyes, rinse immediately with clean water. Protect from frost. Store in a dry and cool place at a temperature not lower than +5°С and not higher than +35°С, protected from direct sunlight. Closed containers with product residues should be disposed of at organized household waste collection points. |
| Made in Ukraine. |
Producer: Scientific and Production Enterprise Bionic House LLC |
