Oil for treatment of saunas "Sauna Oil"
| Oil for saunas | ТУ У 20.5-39517487-001:2015 |
|---|---|
Surface preparation: |
Clean the surface from sticking and grease, wash and dry. Wood for processing must be dry, with a moisture content of less than 20%. The surface to be treated must be dry. Harder woods containing resins and natural oils should be cleaned with a cloth soaked in an organic solvent. |
Design: |
Apply with a brush or a clean cloth, pausing to allow the wood to absorb the liquid. If the oil absorbs quickly, cover more until saturated. Next, heat the steam room and wipe off the remaining oil with a clean cloth no later than 1 hour after application. Works should be carried out at temperatures above 5ºС and humidity less than 80%. Clean working tools immediately after use with white spirit. |
Dry time: |
Approximately 24 hours at +20ºC/65% RH. Low temperatures and high air humidity prolong the drying time. |
Expense: |
Product consumption 8-15m2/l, depending on the density of the wood, can be re-applied after drying during the day. For planed and also very dense wood, due to the lower absorbency, it is recommended to apply a second coat, allowing more time for absorption and drying. |
Retail sales capacity: 0.8l. |
|
Shelf life: |
In unopened original packaging - 5 years. Protect from freezing. |
Cleaning working tools: |
Immediately after finishing work, clean the tools with water. |
Composition: |
Paraffin oil, excipients. The product has a sanitary and epidemiological conclusion of the Ministry of Health of Ukraine. |
Security requirements: |
Transport in hermetically sealed containers. Store indoors at temperatures above +5°C. After using the product for its intended purpose, send the container to a household dump. |
| Produced in Ukraine: |
Manufacturer:LLC "Scientific and Production Enterprise" Bionic House " |

