Universal lasur for interior and exterior work 3 in 1
| Acrylic lasure. Interior and exterior work | ТУ У 20.5-39517487-001:2015 ISO 9001:2015 |
|---|---|
Surface preparation: |
Before processing, the wood must not contain fungal damage (rot, mold, blue stain). The surface on which the glaze will be applied must be clean and dry, free of resinous formations and greasy stains. Before painting a wooden surface, it is necessary to remove dirt, dust and remnants of the old coating. To increase the service life of the coating, it is recommended to impregnate unpainted wood with Antiseptic-Base Impregnate TM Bionic House wood primer before applying glaze. |
Use: |
Mix thoroughly before use. Apply to the prepared surface along the wood grain in a continuous, uniform layer without smudges or gaps, to obtain a uniform color, using a brush, roller or spray method (you can add up to 10% of water from the total volume of paint) in 2 layers. The temperature of the material, the environment and the surface to be treated must be between +5 and +30°C. Air humidity should exceed 80%. The final color of the surface depends on the film thickness of the applied product, as well as on the wood’s own color, so a test painting is necessary. |
Drying time: |
from dust - 1 hour before applying the next layer 2-4 hours at +20°C and maximum air humidity 80%. At low air temperatures and high humidity, drying time increases. |
Consumption: |
1 liter about 12-14 m² when applied in one layer, and also depending on the method of application and the properties of the wood. |
Retail Product Capacity: |
10l, 2,5l, 0,8l |
Shelf life: |
Store in a sealed original container in a dry, cool, frost-free place from +5 to +35 °C, out of the reach of children. Shelf life: at least 2 years. |
Composition: |
Acrylic dispersion, target impurities, fillers, water. |
Precautions: |
Keep away from children! In case of contact with eyes, rinse immediately with clean water. Protect from frost. Dispose of closed containers with product residues at household waste collection points. When processing, use protective clothing and mittens, and when spraying, in addition, a respirator. KEEP AWAY FROM FIRE! CLEANING WORK TOOLS: Immediately after finishing the work, clean the tools with water. |
| Made in Ukraine: |
Manufacturer: LLC “Scientific and Production Enterprise “Bionic House” |