Outdoor varnish for wood - Joncryl

Surface preparation:

Before using varnish, the surface must be cleaned of dust and dirt. When applying, avoid direct sunlight, avoid drafts. Work should be carried out at a temperature of 15°C to + 25°C and a relative humidity of 50-70%.

Design:

To varnish in 2-3 layers with intermediate sanding after 2-4 hours. Without sanding, the varnish can be reapplied after 1-2 hours. To obtain a high-quality smooth surface, sand after applying each layer. Apply varnish with a brush or spray.

Dry time:

Up to 2-3 hours at +20ºC/65% relative humidity. Low temperatures and high air humidity prolong the drying time.

Expense:

Consumption about 1l / 9-10 m2.

Retail sales capacity: 10l, 2.5l, 0.8l.

Shelf life:

Store at a temperature not lower than 5°C, avoid direct sunlight. Shelf life 12 months in original packaging.

Cleaning working tools:

Immediately after finishing work, wash the tools with water.

Composition:

Water-soluble composition based on acrylic elastic dispersion with stabilizing additives. Viscosity at 20°C (Brookfield) ~ 50-200 mPa•s; pH ~ 8-9; Dry residue ~ 31-35

Security requirements:

Do not use empty food storage containers. Store and transport in hermetically sealed containers. at temperatures from plus 5°С to plus 30°С in a dry, well-ventilated area, away from heat sources; protect from direct sunlight, freezing.

Manufacturer:

LLC "Scientific and Production Enterprise "Bionic House"

Ukraine, Kyiv 02088, st. Karla Marksa, 9.
Sales department: sale@bionic-house.com.ua