Panel Lacquer - for wood finishes
Panel varnish on wood | ДСТУ Б В.2.7--233:2010 |
---|---|
Surface preparation: |
Before applying the varnish, the surface must be cleaned of dust and dirt. When applying, avoid direct sunlight, avoid drafts. Works should be carried out at temperatures from 15°C to + 25°C and relative humidity of 50-70%. |
Application: |
Lacquer in 2-3 layers with intermediate sanding after 2-4 hours. Without sanding, the varnish can be reapplied after 1-2 hours. To obtain a high-quality smooth surface, sand after applying each layer. Apply varnish with a brush or spray. |
The addition of color pigments provides the desired decorative effect and UV protection. Surfaces exposed to the sun should be treated more frequently. |
|
Drying time: |
Up to 2-3 hours at + 20ºС/65% relative air humidity. Low temperatures and high air humidity prolong the drying time. |
Consumption: |
Consumption about 1l/9-10 m2 |
Retail trade capacity: 10L, 2.5L, 0.8L. |
|
Shelf life: |
Store at a temperature not lower than 5°C, avoiding direct sunlight. Shelf life 12 months in original packaging. |
Cleaning of working tools: |
Rinse tools with water immediately after completion of work.. |
Composition: |
Water-soluble composition based on RC-acrylic dispersion with stabilizing additives. Viscosity at 20°C (Brookfield) ~ 500-2000 mPa • avg ~ 8-9 Solids content ~ 30-33 |
Precautionary measures:: |
Do not use empty food storage containers. Store and transport in hermetically sealed containers. at temperatures from plus 5°C to plus 30°C in a dry, well-ventilated area, away from heat sources; protect from direct sunlight, freezing. |
Made in Ukraine: |
Manufacturer: LLC "Scientific and Production Enterprise Bionic House" |