Parquet varnish water-soluble, acrylic-urethane Joncryl
Water-based parquet varnish | ДСТУ Б В.2.7-233:2010 |
---|---|
Surface preparation: |
Before applying the varnish, the surface must be cleaned of dust and dirt. When applying, avoid direct sunlight, avoid drafts. Works should be carried out at temperatures from +15°C to + 25°C and relative humidity of 50-70%. |
Usage: |
Lacquer the surface in 2-3 layers with intermediate sanding after 2-4 hours. Without sanding, the varnish can be reapplied after 1-2 hours. To obtain a high-quality smooth surface, sand after applying each layer. Apply varnish with a brush or spray. |
The addition of pigments provides the desired decorative effect and UV protection. Surfaces exposed to the sun are recommended to be tinted. |
|
Drying time: |
Up to 2-3 hours at +20ºС/65% relative air humidity. Low temperatures and high air humidity prolong the drying time. |
Consumption: |
about 1L / 9-10 m2. |
Retail commodity capacity: 10l, 2,5l, 0,8l. |
|
Shelf life: |
Store at a temperature not lower than 5°C, avoid direct sunlight. Shelf life 12 months in original packaging. |
Cleaning of working tools: |
Immediately after completion of work, wash the tools with water. |
Composition: |
Water-soluble composition based on a hybrid of aliphatic polyurethane and acrylic dispersions with stabilizing additives. Appearance of a film - transparent, without inclusions. Viscosity at 20°C (Brookfield) ~ 50-200 mPa•s; pH ~ 8-9; Dry residue ~ 31-35 |
Precautionary measures: |
Do not use empty food storage containers. Store and transport in hermetically sealed containers. at temperatures from plus 5°C to plus 30°C in a dry, well-ventilated area, away from heat sources. Protect from direct sunlight and freezing. |
Made in Ukraine: |
Manufacturer: LLC "Scientific and Production Enterprise Bionic House" |