Universal varnish for wood - water
| Universal varnish for wood | ДСТУ Б В.2.7--233:2010 |
|---|---|
Surface preparation: |
Before applying the varnish, the surface must be cleaned of dust and dirt. When applying, avoid direct sunlight, avoid drafts. Works should be carried out at temperatures from +15°C to +25°C and relative humidity up to 50-70%. The moisture content of wood should not exceed 12%. |
Application: |
Shake well before use and mix thoroughly. Lacquer in 2-3 layers with intermediate sanding not earlier than after 3 hours. Without sanding, the varnish can be reapplied after 3-4 hours. To obtain a high-quality smooth surface, sand after applying each layer. Apply varnish with a brush or spray. |
|
The addition of colored pastes provides the desired shade. This varnish is not recommended for surfaces exposed to direct sunlight. |
|
Drying time: |
Up to 3-4 hours at + 20ºС/65% relative air humidity. Low temperatures and high air humidity prolong the drying time. |
Consumption: |
about 8-10 m2/l |
Retail commodity capacity: 10l, 2.5l, 0.8l. |
|
Shelf life: |
Store at a temperature not lower than 5°C, avoiding direct sunlight. Shelf life 12 months in original packaging. |
Cleaning of working tools: |
Immediately after completion of work, wash the tools with water. |
Composition: |
Water-soluble composition based on acrylic-styrene copolymer with stabilizing additives. |
Precautionary measures: |
Do not use empty food storage containers. Store and transport in a hermetically sealed container at a temperature of +5°C to +30°C in a dry, well-ventilated area, away from heat sources. Protect from direct sunlight, freezing. |
| Made in Ukraine |
Manufacturer: LLC "Scientific and Production Enterprise "Bionic House" |


