"Antizhuk" insecticidal antiseptic for wood

Description Technical specification Flow calculator

Code: AC-0004

To combat pests, wood beetles, larvae, worms, ants; Base: Aqueous solution of insecticidal action based on new generation pyrethroids; Properties: Protects against any type of wood-eating insects and beetles.

Submit a request

179.00 грн.

Water-based, ready-to-use wood pest control agent

Form: Composition of active substances (pyrethroids) on a water basis. Turbid, colorless liquid with a characteristic odor.

Purpose:Antizhuk sanitizing insecticidal antiseptic is used to combat tree-eating pests such as beetles, worms, ant larvae, etc. These include shashel, bark beetle, grinder beetle, various types of termites, as well as some other species of the wood-eating arthropod family.

It is used to protect and treat wood by impregnation (spraying or rubbing) or injections of Antizhuk into holes or passages that have appeared from larvae, or by saturating wood with this agent by wetting, perforating or in autoclaves under industrial conditions.

High efficiency against wood-eating insects

Properties: "Antizhuk" is made on the basis of a new generation of pyrethroids, which have an increased effectiveness against arboreal arthropods and a reduced effect on beneficial insects, such as bees. It is well absorbed into the tree, stops the development and destructive activity of woodworms at any stage of development (larvae or adults). It is effective both as a protective and as a sanitizing agent. Ensures the safety of freshly sawn lumber. Does not stain the wood texture, does not affect the strength and adhesion, and does not leave efflorescence on the surface of the wood. Suitable for subsequent finishing, such as painting and varnishing. Insecticidal impregnation "Antizhuk" also stops the spread of mold and fungus, and can be used as a powerful antiseptic for wood treatment

The ready-to-use composition does not polymerize, but can be toxic, therefore it requires special care when working with it.

It is mandatory to use protective equipment for eyes, mucous membranes, respiratory tract, and skin when treating with Antizhuk.

"Antizhuk" - ready-to-use aqueous insecticidal impregnation for wood	ТУ У 20.5-39517487-001:2015
Preparing the surface:	Clean the surface of bark, dust, dirt, and other contaminants. Does not require special surface preparation. It can be applied to wet (up to 80%) freshly sawn wood. Work should be carried out at ambient temperature and the treated surface from +5°С to +40°С.
Application 2 possible ways wood processing	Immersion of lumber or moldings in mortar: This method is most effective for processing a large amount of lumber in an industrial environment. The amount of solution in the bath must be such that it covers the level of the stack by 50 mm during the entire treatment process. The stack is immersed in a solution bath, held for 20-30 seconds for stacks with a gasket or 1-2 minutes for dense stacks, and removed. The processed lumber package is kept above the bath for at least 30 seconds and then on a special platform for at least 3 minutes to drain and collect excess solution. Applying the working solution to the surface of the wood with a brush or pneumatic spray: The application of the solution must be uniform over the entire surface to be treated, until a regulated consumption is reached. It is recommended to carry out work on wood processing at an ambient temperature and the treated surface not lower than +5°C. Processing of frozen wood is not allowed. Treated wood should be protected from water and atmospheric precipitation until the surface is completely dry - 24 hours at a temperature of 16-20 ° C and a relative humidity of 60%.
Expense:	To prevent the development of pests, the total total absorption, excluding losses, is at least 250 ml / m2 for non-barking and 150 ml / m2 for barking round logs; up to 100 ml/m2 for sawn and planed surfaces. For the destruction of pests in infected wood, the consumption increases by 2.5 - 3 times. During processing.
Retail trade capacity: 1l. 3l, Bottling to order.
Dry time:	Intermediate between treatments 20-30min. at a temperature of (18-22)°С. Complete no more than 24 hours at (18-22)°C.
Storage conditions:	At temperatures from plus 5°C to plus 30°C in a dry, well-ventilated area, away from heat sources. Protect from direct sunlight and freezing.
Shelf life:	2 years in hermetically sealed containers. For questions about the actions to be taken at the end of the shelf life of products, contact the manufacturer. Precipitation is possible.
Composition:	Water, composition of active pyrethroid substances and functional additives.
Safety measures:	WARNING THE PRODUCT IS TOXIC! precautions and safety regulations must be observed when working with a toxic substance When applying an antiseptic, avoid contact with open parts of the body and ingestion. In case of contact with eyes and mouth, rinse thoroughly with water. The product is non-flammable. Store and transport in hermetically sealed containers. After using the product for its intended purpose, close the container tightly and send it to a household dump.
Made in Ukraine:	Producer: LLC "Scientific and Production Enterprise "Bionic House"

"Antizhuk" insecticidal antiseptic for wood

Water-based, ready-to-use wood pest control agent

High efficiency against wood-eating insects

Preparing the
surface:

Application

Expense:

Retail trade capacity: 1l. 3l, Bottling to order.

Dry time:

Storage conditions:

Shelf life:

Composition:

Safety measures:

The area of the painted surface

Paint consumption

Number of layers

Total: consumption for a given area

"Antizhuk" insecticidal antiseptic for wood

Water-based, ready-to-use wood pest control agent

High efficiency against wood-eating insects

Preparing the surface:

Application

Expense:

Retail trade capacity: 1l. 3l, Bottling to order.

Dry time:

Storage conditions:

Shelf life:

Composition:

Safety measures:

The area of the painted surface

Paint consumption

Number of layers

Total: consumption for a given area

Preparing the
surface: