Carnauba wax oil for wood - Oil Wax
| Carnauba wax-oil for interior use | ТУ У 20.5-39517487-001:2015 |
|---|---|
Surface preparation: |
The surface to be treated must be dry. Clean the surface from dirt and dust, grease and oil. The moisture content of wood should not exceed 13-15% for conifers, and 10-12% for hardwoods. The surface damaged by fungi and bacteria must also be cleaned before painting. |
Design: |
Dispense the material in thin layers with a brush or rag and let it soak. Excess material that is no longer absorbed must be wiped off within 1 hour at the latest. Especially carefully impregnate the end surfaces of the wood. Mix thoroughly before use. |
Dry time: |
Drying time 24 to 72 hours at 20°C and 65% relative humidity. Apply the second layer after the first has completely dried. Low temperatures and high humidity increase the drying time. Complete polymerization of the surface occurs after 14-25 days |
Expense: |
Consumption per coat, 1 liter per 18-22 sq/m, or 56-46 g per sq/m. Depending on the structure and texture of the wood. |
Retail sales capacity: 10l, 3l, 1l. |
|
Shelf life: |
Guaranteed shelf life in hermetically sealed original packaging is 36 months. Store in a dry, cool, frost-protected place. |
Cleaning working tools: |
Immediately after finishing work, clean tools in warm water with soap or mineral spirit thinner. |
Composition: |
Combination of natural oils and carnauba wax. |
Security requirements: |
The following safety measures must be observed: keep out of the reach of children; during and after work ensure good ventilation in the room. In case of contact with eyes or skin, rinse immediately with plenty of clean water. Do not drain into sewers, waterways and on the ground. KEEP OUT OF FIRE! |
| Made in Ukraine: |
Manufacturer: LLC "Scientific and Production Enterprise "Bionic House"
|


