Terrace oil - Strong
| Protective oil for terraces | ТУ У 20.5-39517487-001:2015 |
|---|---|
Surface preparation: |
The surface should be thoroughly cleaned of dust, dirt, and foreign matter with a brush. The wood for processing must be dry, with a moisture content of less than 20%. To ensure the maximum protective effect, new and cleaned surfaces must be primed with 1–2 layers of colorless primer Organic protect or Jrganic protect oil for wood protection. Final processing of wood should be done no earlier than 24 hours after priming the surface. If the surface is horizontal and the consumption of the primer is greater, it may take more than 24 hours for the surface to completely dry. The ends of the boards are treated especially carefully, impregnating them to saturation. Surface priming should be carried out as early as possible. |
Applying: |
Before use, make sure that the wood is dry. Oil is applied with a brush in 1-2 layers until saturated. Remove excess oil that has not been absorbed into the surface 15-20 minutes after application with a tissue. It is necessary to treat the ends of the wood with special care. |
|
In order to increase durability, it is not recommended to use the product in a colorless state, the addition of pigments provides the desired decorative effect and protection against the effects of UV radiation. Surfaces constantly exposed to wear and tear, exposed to the sun and rain, require annual treatment. When oiling as care, we recommend applying one layer of oil to the cleaned surface. |
|
Drying time: |
The final drying time of the oil is 24 hours at a temperature of 18-22°C. During processing, periodically clean the brush with a clean cloth. |
Expense: |
For one layer, 1 liter/10-12 m2, depending on the type of wood. |
Retail capacity: 10l, 2.8l, 1l. |
|
Storage period: |
2 years in unopened factory packaging. Not afraid of frost. |
Cleaning working tools: |
Immediately after finishing the work, clean the tools with a thinner based on white spirit. |
Composition: |
Linseed oil, alkyd-urethane resin, solvent, fungicides, auxiliary substances. The product has a sanitary and epidemiological certificate of the Ministry of Health of Ukraine. |
Safety requirements: |
Oil should not be used on surfaces that come into direct contact with food. Do not use empty food storage containers. Store and transport in a hermetically sealed container. Store indoors at a temperature of minus 40°C to plus 30°C. Protect from direct sunlight, heat and moisture. When carrying out painting works, as well as after their completion, thoroughly ventilate the room. Use rubber gloves to protect your hands. After using the product as intended, close the container tightly and send it to the household waste dump. KEEP AWAY FROM FIRE! |
| Made in Ukraine: |
Manufacturer: LLC Scientific and Production Enterprise "Bionic House" |
