Wax for wood universal Universal Wax
| Wax for wood universal | ТУ У 20.5-39517487-001:2015 |
|---|---|
Surface preparation: |
The prepared surface must be clean and dry, thoroughly free from dirt, wax and grease. Dirt, dust spots must be removed. If necessary, wet cleaning, drying and degreasing with an organic solvent can be applied. If there are traces of mold or blue stain on the wood, the affected areas should be cleaned. |
Design: |
The product is ready to use. Stir before and during use. Apply in a continuous layer in the direction of the wood fibers. Treat the surface to saturation with a brush, sponge or woolen cloth 1-2 times. Remove excess oil that has not absorbed into the wood with a rag no later than within 1 hour after application. Clean working tools immediately after use with white spirit. |
Dry time: |
Approximately 24 hours at +20ºC/65% RH. Complete polymerization of the surface occurs after 14-25 days |
Expense: |
Product consumption 9-13 m2/l, at least 2 coats, can be reapplied after 12 hours. For planed wood, as well as very dense wood, due to the lower absorbency, it is recommended to apply a 3rd layer if necessary. |
Retail sales capacity: 3l, 1l. |
|
Shelf life: |
In unopened original packaging 2 years. Not afraid of frost. |
Cleaning working tools: |
Immediately after finishing work, wash tools with warm water and soap or a thinner based on white spirit. |
Composition: |
Linseed oil, a mixture of natural oils, wax, improving additives. |
Security requirements: |
Do not use empty food storage containers. Store and transport in hermetically sealed containers. Store indoors at temperatures from minus 40°C to plus 30°C. Keep away from direct sunlight, heat and moisture. After using the product for its intended purpose, send the container to a household dump. KEEP OUT OF FIRE! |
| Made in Ukraine: |
Manufacturer: LLC "Scientific and Production Enterprise "Bionic House" |
