Façade Lasurе «32Color» - paint for wood
| Acrylic lasure, antiseptic for wood. For interior and exterior use | ТУ У 20.5-39517487-001:2015 |
|---|---|
Surface preparation: |
The surface to be treated must be dry. Clean the surface from dirt and dust, grease and oil. The moisture content of wood should not exceed 13-15% for conifers, 10-12% for deciduous ones. The damaged surface with fungi and bacteria must also be cleaned and treated with antiseptic agents before painting. Apply Base Impregnate or Organic Protect antiseptic primer to the wood in the first layer, depending on the moisture content of the wood. |
|
As a primer, it is recommended to use "Antiseptik Base impregnate", "Antiseptik Organic protect |
|
Painting: |
During storage of the product, delamination is possible, which does not impair its quality. Stir thoroughly for 5-10 minutes before use. Apply with an acrylic brush in even strokes, rubbing into the base. For spray application and for ease of application, the product can be thinned with water up to 10%. In order to avoid differences in shade for painting a solid surface, mix in one vessel a sufficient amount of tinted lasure to paint this volume. |
Drying time: |
At a temperature of +20 ° C and a relative humidity of 65%, the surface is dry from dust after 2 hours, tack-free - after 4 hours, repainting after 6-8 hours. At lower temperatures and higher humidity, the drying time will be longer. |
Consumption: |
Consumption per layer, 1 liter per 12-14 m2, or 70-90 g per 1m2. |
Retail commodity capacity: 10l, 2,5l, 0,8l |
|
Storage conditions: |
Keep out of the reach of children. Ensure good ventilation during and after work. In case of contact with eyes or skin, rinse immediately with clean water. Do not empty into drains, waterways or onto the surface of the ground. Store and transport in a hermetically sealed container. |
Storage period: |
The guaranteed shelf life in hermetically sealed original packaging is 24 months. Store in a cool, dry, frost-free place. |
Composition: |
Acrylic dispersion, pigments, water, functional additives. VOC content: EC-MPC for the product (cat. A/e):130 g/l (2010). This product contains max. 130 g/l VOC. |
Precautionary measures: |
When applying an antiseptic, exclude contact with open parts of the body, ingestion. In case of contact with eyes and mouth, rinse thoroughly with water. After using the product for its intended purpose, close the container tightly and send it to a household landfill. |
| Made in Ukraine: |
Manufacturer: LLC "Scientific and Production Enterprise" Bionic House" |
